ARIKON Gas Alarm Detector with Plug-in and Talking Alarm, Digital Display and 9V Baterry Back Up from ARIKON
We are happy to offer the excellent ARIKON Gas Alarm Detector with Plug-in and Talking Alarm, Digital Display and 9V Baterry Back Up.
With so many available right now, it is wise to have a make you can trust. The ARIKON Gas Alarm Detector with Plug-in and Talking Alarm, Digital Display and 9V Baterry Back Up is certainly that and will be a perfect buy.
For this great price, the ARIKON Gas Alarm Detector with Plug-in and Talking Alarm, Digital Display and 9V Baterry Back Up comes widely respected and is always a popular choice amongst most people. ARIKON have included some great touches and this results in good value for money.
AV voltage:AV 9V-240V 50-60Hz
Battery voltage:9V rechargeable battery(optional)
Working temperature:0-50 ?
Alarm Density:2500PPM( ± 1500PPM)
Alarm time: keep alarming after over 2500PPM
1.The gas detector is easy to be effected by the sharp pounding and shock in transit or installation
2.This is a Combustible Gas Detector, can not detect the poisonous gas such as CO.
3.Surface cleaning per month, specialist inspection per half year.
4.Do not use the detergent to clean the gas detector
5.Do not spray any sprays such as air freshener, hair spray, etc.
6.This product is only used to reduce the accident, cannot make sure every time. Except use our detector in right way, pleasure pay more attention in your daily life and strengthen safety and security consciousness
How to test
Plug into 90V-240V power and wait 3 minutes.
press the test button, then the detector will siren and the LCD display will show " tESt"
Turn on your gas knob, when PPM goes above 1000, the LCD display comes on with the PPM shown in bright, clearly visible red LED numbers; when PPM passes 2500, the alarm sounds with a voice
How to reset
press the test button and plug the gas detector into AC power. After 3 seconds, pull out the detector and release the test button. Plug the detector into AC power again without pressing test button. Wait 3 minutes, then you will see 555 in the LCD Display.It means the detector has been reset successfully.
2: Pull out the detector and plug again, it will count down 3 minutes, you will hear the voice prompt, it works fine.
We have passed the CE & ROHS Certification and meet the EN50194 standard