Natural Gas Detector Natural Gas Alarm, CH4 Combustible Gas Leak Alarm from DOXUNGO
Carbon Monoxide Alarms are delighted to stock the fantastic Natural Gas Detector Natural Gas Alarm, CH4 Combustible Gas Leak Alarm.
With so many available today, it is good to have a brand you can trust. The Natural Gas Detector Natural Gas Alarm, CH4 Combustible Gas Leak Alarm is certainly that and will be a perfect acquisition.
For this reduced price, the Natural Gas Detector Natural Gas Alarm, CH4 Combustible Gas Leak Alarm comes widely respected and is a regular choice with most people. DOXUNGO have included some nice touches and this means good value for money.
Use of environmental conditions:
Temperature: 0-40 degrees
Humidity Less than 95% RH and No frost
Sampling method: free spread
Alarm setting: 7% LEL
Warm-up time: about 180 seconds
Sensor Type: Semiconductor
Service life: 5 years
Operating voltage: AC100V-240V
Dimensions: 59mm * 59mm * 40mm
Alarm mode: sound, light alarm
Alarm volume is maore than 70 dB or equal to 70 dB
1. The green power indicator does not light, the power line is not connected or the power indicator is bad
2. Press the "self-test" button and then no sound and light alarm, it is circuit failure
3. If there is no reaction to the test gas, the warm-up is not ending or the circuit is out of order
4. If the detector has been alarm after the start of the preheat: because of the environment where people smoking and drinking too much or use a lot of perfume, gasoline, banana water, paint and other volatile organic compounds, if the alarm is stored in this environment for too long, the circuit will out of order
Equipment and gas stove should be located in the same indoor space, the distance between the equipment and the possible gas leakage source is maintained at 1 to 3 meters
Double alarm: This alarm is up to 70 dB of sound alarm, innovative 360-degree no dead ring alarm light design, and the light is colorful. This product can always protect your safety when you use natural gas.
Indicator status Description: Power indicator light (power is normal), green ring light flashing (warm-up state). Yellow ring flashing (fault reminder) red ring light flashing (leak alarm) Note: During warm-up, no detection function.
Energy saving: low power consumption, 2KWH per year.
Easy to install: just plug the socket to detect.